![gotek usb floppy emulator format gotek usb floppy emulator format](https://www.n4vlf.net/images/PartsNeeded1.png)
WinHex allows you to take any Kurzweil K2000 floppy disk and save it as a.I've provided the basics below and will add more detail to this blog as time allows.
#GOTEK USB FLOPPY EMULATOR FORMAT SOFTWARE#
The software that came with your floppy emulator is a pain but it does work. By using a combination of the buttons you can cycle through 100 "disks". The button on the left allows you to advance the "tens" column 0-9. Of the two buttons, the one of the right allows you to advance 0-9.The buttons on the floppy emulator allow you to choose which floppy you want to read / write from.At this point you should be able save programs onto your thumb drive the same way that you used to do with floppy disks.Take a break and pat yourself on the back, your done for now.You've just formatted your thumb drive into 100 1.4MB floppy disks. When it is complete it will read nothing but zeros on the display. Release you hold on the buttons and wait for the emulator to finish it's cycle.Keep holding the buttons down until you see the LED display on the emulator start cycling through numbers. Hold down the two buttons on the emulator simultaneously and power on the synth.Insert a usb thumb drive into the usb port on the floppy emulator.Flip the synth back to it's normal position and plug it in.Replace the 6 screws that you removed earlier.Flip the bottom of the synth back onto the top.Carefully connect the ribbon and power connectors. Insert the new floppy drive emulator into the bay and screw it in.Make sure you have set the jumpers on the floppy emulator to the "MO" and "JA" positions.Once the screws are removed, take the floppy drive out of the synth. Carefully remove the ribbon and power connectors from the drive and unscrew it from the bay. There is a cable connecting the two parts together. Carefully lift the bottom of the synth and flip it away from you.One in each corner and two in the middle. There are 6 screws that you need to remove.Flip the synth upside down on a soft surface.You need to make sure you have a block in the "MO" and the "JA" positions on the floppy emulator. Probably the most frustrating thing for me to figure out.
#GOTEK USB FLOPPY EMULATOR FORMAT WINDOWS#
If you have a newer version of windows you will need to run the software in compatibility mode.